Hot melt adhesive for inner lining foam White

Application Product Specifications

Operation method

• Please preheat the glue melting device before using the glue strip|granule.
• When the glue gun is used, please pay attention to control the temperature and the speed of glue pressure, and turn off the power immediately when not in use.
• The work of gluing and shaping must be completed within the open time of the glue, clamping the glued object to cool down to room temperature.
• The temperature of the melting glue system is high, please do not touch it with your hands, and you must wear safety protection equipment when working to prevent burns.

Specification and storage

1. The performance of hot melt adhesive and the use of temperature is closely related to the operator should be based on the specific circumstances of the temperature control, so as not to cause operational inconvenience.
2. Due to the different surface treatment of the material, so in the difficult to bond the surface should be repeated trials, such as coating paint.
3. Due attention should be paid to the material safety data sheet
4. Specification: 20KG/ctn
5. Store in a cool and dry place

Precautions

1. The place of use should be well ventilated and away from open fire.
2. Avoid contact of dissolved material with eyes and skin.
3. If the dissolved material comes into contact with the skin, immediately immerse the injured skin in water or cold water rinse, wait for cooling and then take off the sticky material and then silicone oil to rub the red and swollen place, send to the doctor for treatment.

Keywords: White hot melt adhesive for shoe lining foam, hot melt adhesive for shoe materials, hot melt adhesive for shoe lamination, APAO high tack shoe lamination hot melt adhesive