Medium temperature hot melt adhesive for furniture edging

Application Product Specifications

Operation method

Please preheat the glue melting device before use, the preheating time is generally about 2 hours is appropriate.

Preheat the amount of glue in the pot to grasp the appropriate amount of glue, add too much after the gel round melting, will make it deteriorate and aging, viscosity reduction, affecting the adhesion.

Must be in the glue open time to complete the work of bonding and shaping, clamping the sticky objects cooled to room temperature.

The temperature of the melting glue system is high, please do not touch it with your hands, and you must wear safety protection equipment when working to prevent burns.

Specification and storage

The performance of hot melt adhesive and the use of temperature is closely related to the operator should be based on the specific circumstances of the temperature control, so as not to cause operational inconvenience.

Due to the different surface treatment of the material, so in the difficult to bond the surface should be repeated trials, such as coating paint.

Due attention should be paid to the material safety data sheet

Specification: 25KG/bag

Store in a cool and dry place

Precautions

The place of use should be well ventilated and away from open fire.

Avoid contact of dissolved material with eyes and skin.

If the dissolved material comes into contact with the skin, immediately immerse the injured skin into water or cold water rinse, wait for cooling and then take off the sticky material and then silicone oil rub the red and swollen place, send to the doctor for treatment.